If you are looking at Instahangers, let us alert you to the QuikCloset kit. The kit consists of two Instahangers supporting a closet bar between them. The idea is so simple it’s ingenious.
 
Each Instahanger functions on its own by screwing vertically to the wall and opening out from the bottom. The bar that slides open can support hangers. It can also detach so you may slide on your closet rod. The rod is telescopic so you may choose the size of your closet, and the whole set is weather resistant too.
 
It’s less obtrusive than a floor rack as it folds out of the way between uses. It even disguises itself as decor when folded away. You can get different styles from plain to picture frames.
 
Brianna demonstrates the Instahangers and QuikCloset on video below:
 

The Moerman Handrail Airer is versatile enough to fit over virtually any size door or rail. This indoor/outdoor clothes dryer is powder coated to hang over your deck rail, your shower door and some surprising places. The dryer comes assembled; simply lift the arms and slide them to the right angle for your door or rail. The dryer boasts rods thin enough to use with clothespins while the outside frame is strong enough to use with hangers. Offering 20 feet of drying space, this airer is perfect for single people or to take on road trips. Let Brianna show you the Moerman Handrail Airer in action below:
 

The Moerman 3 Tier Folding Drying Rack uses vertical space and opens in one motion. Just pull the sides upward and the dryer unfolds like an accordion. The foot release latches the dryer at two settings. Lift the foot release with your toe to reduce the dryer to a slightly shorter setting, or keep it lifted and collapse the dryer for storage.
 
This rust-resistant dryer is made of powder coated steel and suitable indoors or outdoors. Indoors, foot caps protect your floor. The dryer provides 49 feet of drying space plus hooks on the corners for hangers. It is strong enough to hold thick, wet clothes. Couples who spend their winters outside would find this useful for drying coats in the foyer or over a heating vent. Watch Brianna unfold the Moerman 3 Tier Folding Drying Rack on video below:
 

The Moerman Overbath Clothes Drying Rack requires no assembly and fits over any bathtub at nearly unlimited angles. The dryer can balance over both sides of the tub, or can sit with one side on the tub and one against a wall or counter. Its 14 powder coated steel rods have 30 feet of drying space to hold 22 pounds of laundry. While designed for indoors, this dryer is rust resistant enough to use outside. Students or couples in dorm rooms, condos, or apartments will find the Moerman Overbath useful.
 
To set up the Moerman Overbath, first remove the caps locking the feet together. Then loosen each ergonomic handle to loosen the top joints. Now you may unfold and angle your dryer. Tighten the handles again to lock your dryer at your chosen angle. The dryer’s plastic legs protect your surfaces, while extra rubber feet swing out to grip and balance against edges. Brianna shows you the Moerman Overbath Clothes Drying Rack on the video below:
 

The Leifheit Quartett Laundry Drying Rack is simply more than an over-door rack. This rack has wide hooks that adjust to 12 sizes to hang over anything from banisters to cupboard doors. While it is a space saver, it’s easy to assemble and disassemble so you can even put it away whenever you want. This dryer provides 6½ feet of drying space on four smooth rods that don’t snag delicates, perfect for your hand-washables. Singles or travelers in small spaces will love keeping this dryer handy.
 
To assemble the Leifheit Quartett, simply slide each mounting bracket into a slider. You may slide the brackets forward until they are the perfect fit for your door. To increase the size of or remove the brackets, press down on the red button, push slightly forward, then pull back. Brianna demonstrates how to assemble the Quartett below:
 

The Leifheit Centering Ground Peg is a cement-free ground peg for almost any rotary dryer. For households looking for even more stability than the Screw-In Ground Peg, the Centering Ground Peg is bigger, more protected, and easier to get in straight. Its construction starts with a metal core surrounded by sturdy plastic with a screw on the bottom and a rain cap on top. It fits a 50 millimeter dryer pole and has a lawn mowing edge to protect both the ground peg and your lawn mower.

To install the Leifheit Centering Ground Peg, first snap the lawn mowing edge together. Slide it onto the ground peg from the bottom. Now jam and twist the ground peg into the ground; you may prefer to start by digging a small hole with a garden spade. Insert the metal handle through both holes in the peg and twist it further into the ground with both arms. You may remove the peg in the same way, any time you wish to move it. Now just open the rain cap and insert your rotary dryer.

This ground peg’s top is removable and comes with three settings that you may adjust by sliding the notch around to each:

At Setting 1, you may remove the top.
At Setting 2, the top remains on the peg but spins.
At Setting 3, the top is completely secure.

Watch Brianna demonstrate the Leifheit Centering Ground Peg in the video below:

The Leifheit Rollfix Retractable Drying Rack has 5 retractable lines that extend up to 13 feet each, totalling 69 feet of drying space for couples and small space dwelling families. While ideal indoors, this retractable clothesline protects its lines in the easy-to-clean case between uses, so you may prefer to mount it outdoors.
 
A Leifheit Rollfix is worth the installation. Brianna demonstrates in the video below, while this blog provides a recap on the instructions.
 

The Leifheit Rollfix Comes With:

Dryer
1 bracket
1 short screw
1 long screw
2 screw hooks
4 plastic wall anchors

You Will Need:

Drill or screwdriver
Pencil

Step 1: Mark your holes

Using the dryer as a guide, mark where you will drill screw holes with a pencil. On the opposite wall, use the holes inside the dryer cover to mark the locations for the screw hooks.

Step 2: Secure your dryer

On the left side of the dryer you will screw in your bracket with the protruding slider facing into the dryer. You may use a wall anchor to make your holes last longer in drywall. Slide the dryer onto the bracket. Open the cover and screw the long screw in on the right.

Step 3: Secure your lines

On the opposite wall, screw in the screw hooks.

Now you may pull open the dryer and hook it onto the screw hooks. There is a knob on the side of the dryer for tightening the lines while in use. When you are finished with the dryer, you may unhook it and let it wind itself in. The Leifheit Rollfix Retractable Drying Rack is a convenient space saver that is easy to “put away.”

The Leifheit Screw-In Ground Peg is a stable and easy cement-free ground peg. Despite needing no concrete to install, this peg screws in securely and is easy to get straight in the ground. You may move it any time you like.
 
This 17 inch screw has a metal core and sturdy plastic construction. It fits any rotary dryer with a 50 millimeter pole. It has a cap to keep rain out between uses.
 
To install the Leifheit Screw-In Ground Peg, simply screw it into the ground, then insert the handle when the going gets tough to screw it further with both hands until only three or four inches are exposed. You may want to start a small hole with a garden spade to ensure you start straight. You may remove this ground peg the same way you screwed it in, using the handle. Brianna shows you how to install the Leifheit Screw-In Ground Peg below:
 

The Moerman Legacy Umbrella Clothes Dryer is large and durable to serve families for years. This rust-resistant anodized aluminum dryer has a 1-piece post and individually strung PVC coated lines. It provides 197 feet of drying space and stays taut at the height of your choice using two sliders.

To install the Moerman Legacy, first hammer the ground spike into the ground with a hammer and a block of wood. Then slide the dryer into the ground spike. Untie the string securing the dryer closed, hold the button on the slider, and lift. The dryer locks at the height of your choice; adjust the top slider for shape and tautness.

This dryer’s spin technology lets it spin in a light breeze to reduce drying time. It also lets you stand in one place to load and unload. Brianna demonstrates the Moerman Legacy Umbrella Dryer below: